Monthly Specials

1/2 Inch Thru Rod Kit With Nuts For Stock Width Front Axle Beam Does Not Include Teflon Washers

Quantity in Basket: None
Part Number: ac401030

Price: $70.75

Sold As: 2 Thru Rods And 4 Nuts

Quantity:

Rods are 40 1/2 Inches long

For best results use a teflon washer against the arm, then the clamp nut, then a nylock nut. Especially use a nylock jam nut on the driver side because even with a pinch nut, with the arm moving up and down the driver side nuts tend to loosen up. A thru rod is required on a Volkswagen Ball Joint or King and Link Pin front axle beam when you remove the front torsion bars. Thru rods hold your arms inside of the beam and allow the front trailing arms to move independently from the driver side to the passenger side. Once you remove your torsion plates, a coil over shock, air shock, or air bag is required to support the weight of the vehicle.

A stock width beam is 34 inches wide not including the trailing arms.

Related Parts

Part Number	Name	Image	Price
fasn12-20n	Grade 8 Fine Thread 1/2-20 Nylock Hex Nut Zinc Plated Gold Color		$0.80
ac401035-500	1/2 Inch Diameter American Made Chromoly Thru Rod With Nuts Custom Made To Length No Refunds		$154.50
ac401035-625	5/8 Inch Diameter American Made Chromoly Thru Rod With Nuts Custom Made To Length No Refunds		$189.50
ac401033-500n	Replacement 1/2-20 Thread Pinch Nut For Thru Rods		$9.00
ac401034-500w	Thru Rod Bronze Washer With 1/2 Inch Id Hole To Go Between Thru Rod Nut And Front Trailing Arm		$3.45
ac401030-01	1/2 Inch Replacement Thru Rod Only For Stock Width Axle Beams		$29.20
ac401031	1/2 Inch Thru Rod Kit With Nuts For 5 Inch Or 6 Inch Wider Axle Beam Does Not Include Teflon Washers		$75.25
ac401031-01	1/2 Inch Replacement Thru Rod Only For 5 Inch Or 6 Inch Wider Axle Beams		$29.20
ac401032	1/2 Inch Thru Rod Kit With Nuts For 8 Inch Wider Axle Beam Does Not Include Teflon Washers		$84.90
ac401032-01	1/2 Inch Replacement Thru Rod Only For 8 Inch Wider Axle Beams		$34.99

Customers who purchased this product, also purchased:

Part Number	Name	Image	Price
ac401034-500w	Thru Rod Bronze Washer With 1/2 Inch Id Hole To Go Between Thru Rod Nut And Front Trailing Arm		$3.45
fasn12-20n	Grade 8 Fine Thread 1/2-20 Nylock Hex Nut Zinc Plated Gold Color		$0.80
ac413111	Urethane Front Trailing Arm Torsion Seals For Upper And Lower Arms 1966 To 1977 Ball Joint Front End		$24.10
ac413080-400	Pacific Customs Front VW Trailing Arms 4 Inch Longer x 1.875 Wider For Coil Over Shocks, 4x1		$1,895.00
saco95-6223	Saco Link Pin Shims For 5/8 Link Pins To Adjust Camber On King And Link Pin Front Beams Set Of 40		$32.00
ac501361k	Irs Spring Plate Conversion Kit For Stock Vw Torsion Housing For Coil Over Shocks Or Air Bags		$233.50
ac413116-1750f	Usa Made White Delrin Bushings For Foddrill Trailing Arms In King Pin Axle Beams 1.750 Inch O.D.		$119.95
ac401050nt-00	Usa Made Stock Width Mild Steel King And Link Pin Axle Beam Without Towers For Coil Over Shocks		$317.80