Monthly Specials

Usa Made Swaged Steel Tie Rod 27 Inches Long With 5/8-18 Thread Passenger Side For Bj Or Lp Beam

Quantity in Basket: None
Part Number: ac425124-27s

Price: $40.30

Sold As: 1 Swaged Steel Tie Rod

Quantity:

These heavy duty Swaged tie rods allow you to replace your factory VW tie rods and tie rod ends on your steering box with heim joints. You use a 5/8 heim joint with 1/2 inch misalignment shims that reduce the 5/8 heim to a 1/2 inch bolt. You must drill out your pitman arm and spindle to accept a 1/2 inch bolt. Using these tie rods eliminates the use of a steering damper. For off-road use only. Not intended for street use. Special order lengths are available for narrowed ball joint or king and link pin axle beams.

Our USA made swaged tie rods are super strong. Swaging is a forging process in which the ends of the tie rods are compressed using dies which the tie rods are forced in to. Compressing the ends of the tie rods increases the density of the material.

We offer these swaged tie rods in both aluminum and steel. The advantage of using aluminum on your front end, is that if you hit something with your vehicle the aluminum tie rod will bend before your arms, spindles, or other expensive front end components. The aluminum tie rod would be your "weak point" and tie rods are much cheaper than replacing arms, spindles, or other front end components.

For the hardcore racer or heavy duty sand rail, baja bug, or rock crawler we offer the swaged steel tie rods that are less forgiving in an accident.

Related Parts

Part Number	Name	Image	Price
ac425124-10s	Usa Made Swaged Steel Tie Rod 10 Inches Long With 5/8-18 Thread Driver Side On Ball Joint Beam		$37.90
ac425124-11s	Usa Made Swaged Steel Tie Rod 11.25 Inches Long With 5/8-18 Thread Driver Side On Link Pin Beam		$37.90
fkrodendjmx10t	Fk Rod Ends Usa Made 5/8 Teflon Coated Right Hand Thread Chromoly Rod End Heim Joint With 5/8 Hole		$46.15
fkrodendjmxl10t	Fk Rod Ends Usa Made 5/8 Teflon Coated Left Hand Thread Chromoly Rod End Heim Joint With 5/8 Hole		$46.15
ma581212	Usa Stainless Steel Misalignment Shim For 5/8 Inch Heim Or Uniball For 1/2 Inch Bolt 1/2 Inch Height		$10.05
ma581214	Usa Stainless Steel Misalignment Shim For 5/8 Inch Heim Or Uniball For 1/2 Inch Bolt 1/4 Inch Height		$13.99
fasn58-18jlh	5/8-18 Left Hand Thread Jam Nut For Heim Joints Or Rod Ends		$1.35
fasn58-18jrh	5/8-18 Right Hand Thread Jam Nut For Heim Joints Or Rod Ends		$0.80
ac430004	King Pin Spindle Gusset Kit To Support The Tie Rod Hole When You Drill It For A Heim Or Ford Tie Rod		$25.20

Customers who purchased this product, also purchased:

Part Number	Name	Image	Price
fasn58-18jlh	5/8-18 Left Hand Thread Jam Nut For Heim Joints Or Rod Ends		$1.35
ac425124-10s	Usa Made Swaged Steel Tie Rod 10 Inches Long With 5/8-18 Thread Driver Side On Ball Joint Beam		$37.90
fasn58-18jrh	5/8-18 Right Hand Thread Jam Nut For Heim Joints Or Rod Ends		$0.80
fkrodendhrsmx8t	Fk Rod Ends 5/8 Right Hand Thread Chromoly Rod End 1/2 Inch Hole Built In Misalignment Shoulder		$58.99
fkrodendhrsmxl8t	Fk Rod Ends 5/8 Left Hand Thread Chromoly Rod End 1/2 Inch Hole Built In Misalignment Shoulder		$58.99
fkrodendkmx10	Fk Rod Ends Usa Made 5/8 Male Right Hand Thread Injected Nylon Rod End Heim Joint With 5/8 Hole		$21.20
fkrodendrsmxl8t	Fk Rod Ends Usa Made 5/8 Large Shaft Teflon Coated Left Hand Thread Chromoly Rod End 1/2 Inch Hole		$36.25
fkrodendcfl10	Fk Rod Ends Usa Made 5/8 Female Left Hand Thread Light Duty Rod End Heim Joint With 5/8 Hole		$13.00

Your shopping cart is empty.

New Products

Chrome Rack For 18 Pack Igloo Ice Chest Coolers
Price: $60.00

Vw Rear Suspension Kit 5x5 Micro Stub Arms And Jamar Brakes for Sand Rails, Baja Bugs
Price: $4,999.00

Kennedy Engine Adapter For Honda/Acura K20a, K24z 4 Cylinder Engines To 002 Trans, KEP #7421
Price: $569.00

Jamar JCA1 Clutch Pedal Assembly With 11/16 Bore Master Cylinder And Slave Cylinder
Price: $409.50