|
|
|
|
|
Empi Axle Kit With 16.75 Inch Axles, Porsche 930 Cv Joints, Axle Boots, Axle Boot Flanges, Cv Grease
|
|
Quantity in Basket:
None
Part Number: ac598216
Sold As:
2 Porsche 930 Axle Shafts, 4 Cv Joints, 4 Boots, 4 Boot Flanges, 24 Cv Bolts And Grease
|
|
| |
EMPI CHROMOLY I.R.S. RACE AXLE KITS
EMPI has taken the guess work out of putting together your high performance I.R.S. axles. Complete axle kits are now available and come with their chromoly race axles, nylon ties, boots, C.V. joints, boot flanges, and grease. These axle kits are not assembled.
How to Measure IRS Axle Length:
1.) First adjust your rear wheel alignment toe in. If your tires are toed out like a duck your trailing arms will be closer to your transmission resulting in a shorter axle.
2.) Lift the trailing arm so that if you did have an axle it would be parallel to the floor at zero degrees. This is your shortest point.
3.) Measure from the center of the drive flange on your transmission to the center of the stub axle on your trailing arm. DO NOT measure where your CV joint mounting surface is. You need to measure the bottom of each cup because this is where your axle will plunge into. If you purchase too long of an axle, when your trailing arm moves upward to zero degrees it will shove the axle into the transmission. This will mushroom the ends of your axles and eventually crush the ring gear inside your transmission.
4.) After you have measured this distance, you subtract 1/4 inch total length. For instance if you measure from the center of the drive flange to the center of the stub axle and you get 20 1/2 inches you would buy a 20 1/4 axle.
5.) Measure both sides of the car. It is VERY common to have unequal length axles.
|
|
| |
|
Your shopping cart is empty.
|
|
