|
|
|
|
|
Mobile Vhf Race Radio Coaxial Antenna Cable 17 Feet Long For Both Grounded And Non Grounded Antennas
|
|
Quantity in Basket:
None
Part Number: comradio-antcbl
Sold As:
1 Mobile Radio Antenna Cable
|
|
| |
Compatible with most brands of VHF radio such as Icom, Vertex, Rugged, PCI and Kenwood. On antennas that require a ground plane, for optimal reception you need to have 19 inches of metal surface around the base of the antenna ( A 38 inch diameter circle ). If you have a metal roof you want to mount the antenna in the center of the roof so that the antenna projects a full 360 degrees around. If you mount the antenna toward the rear of the roof it will only reflect toward the front of the vehicle, resulting in reduced reception.
This cable is 17 feet long. It has a standard Coax connection. If the cable is too long for your vehicle you should cut the cable down and reconnect a PL-259 connection on the end of the cable. If you are unable to reconnect a PL-259 connection on this cable and prefer to loop the excess cable, the loops must be 10 inches or greater in diameter. When routing this cable, it must be ran away from intercom cables, HID light cables, or other power sources. Ideally you would run all electrical components on the driver side of the vehicle, and this antenna on the passenger side of the vehicle to prevent interference.
|
Related Parts
|
Part Number |
Name |
Image |
Price |
|
|
comradio-ant |
3Db Gain Mobile Vhf Race Radio Whip Antenna For Metal Roof Requires A Ground Plane |
|
$55.10 |
|
comradio-antngp |
Mobile Vhf Race Radio Whip Antenna For Plastic Roof Or Mounting Tab Does Not Require A Ground Plane |
|
$84.05 |
|
comradio-antmagnet |
Off-Road Chase Vehicle Magnetic Base With Cable For Vhf Race Radio Antenna Part Number Comradio-Ant |
|
$60.15 |
|
comradio-anttab |
Weld On Mounting Tab For A No Ground Plane Vhf Antenna To The Side Of A Tube |
|
$10.00 |
|
axia-antenna-blk |
Axia Alloys Black Anodized Mount For A No Ground Plane VHF Race Radio Antenna Doesnt Include Clamp |
|
$32.00 |
Customers who purchased this product, also purchased:
|
Part Number
|
Name
|
Image
|
Price |
|
|
ac311200-02
|
Type 1 Beetle Solid Transmission Nose Cone Mount Eliminates Rubber Mounts
|
|
$9.00 |
|
ac311203
|
Type 1 Beetle Transmission Mid Mount Welds To OEM Frame Horns For Extra Support
|
|
$22.25 |
|
701173111
|
Weld On Transmission Mounting Bracket For 1966 To 1972 Beetle Torsion Housing Or Sand Rail Torsion
|
|
$44.75 |
|
ac413116-1805
|
Usa Made White Delrin Bushings For King And Link Pin Axle Beams That Have 1.805 Inch Inner Diameter
|
|
$109.95 |
|
bluesea6006tab
|
Blue Sea M-Series Battery Cut Off Isolator Switch Weld On Mounting Tab For The Side Of A Tube
|
|
$13.00 |
|
comradio-anttab
|
Weld On Mounting Tab For A No Ground Plane Vhf Antenna To The Side Of A Tube
|
|
$10.00 |
|
comradio-antngp
|
Mobile Vhf Race Radio Whip Antenna For Plastic Roof Or Mounting Tab Does Not Require A Ground Plane
|
|
$84.05 |
|
ac413116-1760
|
Usa Made White Delrin Bushings For King And Link Pin Axle Beams That Have 1.760 Inch Inner Diameter
|
|
$109.95 |
|
| |
|
Your shopping cart is empty.
|
|
