|
|
|
|
|
Heavy Duty Aluminum Steering Tie Rod Kit for VW Type 1
|
|
Country Of Origin:
USA
Quantity in Basket:
None
Part Number: ac498123
Sold As:
1 Complete Tie Rod Kit
|
|
| |
|
Kit Includes: Swaged Aluminum 14mm Tie Rods Saco Steering Dampner Clamp Steering Dampner Tie Rod Ends and Jam Nuts Please choose your vehicle's year with the bubble selection. If you're not sure of your vehicles year, like on a manx or baja buggy, please contact us for assistance.
If you have a dune buggy or sand rail and you need to check to see what your front end requires use a 17mm and 19mm box end wrench. Put the wrench on each of the four nuts that hold the tie rod to the pitman arm and the tie rod to the spindle. If a 17mm wrench fits onto the nut, they are early model tie rod ends. If a 19mm wrench fits onto the nut, they are late model tie rod ends. It is important that you check all four tie rod ends because some vehicles have two early model and two late model ends. Here is a picture showing how to measure a volkswagen tie rod end:
|
Related Parts
|
Part Number |
Name |
Image |
Price |
|
|
415811131 |
Left Hand Thread Outer Early Model Small Tie Rod End Click Image For Complete Year Listing |
|
$25.20 |
|
415812131 |
Right Hand Thread Outer Early Model Small Tie Rod End Click Image For Complete Year Listing |
|
$25.20 |
|
415821113 |
Right Hand Thread Angled Inner Early Model Small Tie Rod End Click Image For Complete Year Listing |
|
$25.20 |
|
saco64-3100 |
Saco Steering Damper Adapter Clamp On Mount For 1 Inch Diameter Tie Rod |
|
$34.75 |
|
425021211a |
Steering Damper Stabilizer For 1955 Starting At Chassis 20-117903 To 1979 Bus |
|
$62.10 |
|
ac425123-9a |
Usa Made Swaged Aluminum Tie Rod 9 Inches Long With 14Mm 1.5 Thread Driver Side On Ball Joint Beam |
|
$35.75 |
|
fasn14m-150jlh |
14mm-1.5 Left Hand Thread Jam Nut for Stock VW Tie Rods |
|
$4.95 |
|
fasn14m-150jrh |
14mm-1.5 Right Hand Thread Jam Nut for Stock VW Tie Rods |
|
$2.10 |
Customers who purchased this product, also purchased:
|
Part Number
|
Name
|
Image
|
Price |
|
|
ac415070
|
Billet Aluminum Steering Box Clamp Works With Standard Beetle Steering Box On Link Pin Or Ball Joint
|
|
$32.10 |
|
ac598990c
|
Complete Bearing, Seal, Spacer, Cap, And Snap Ring Kit For Both Rear Irs Trailing Arms
|
|
$219.90 |
|
ac750722-125
|
Weld On Double Sheared Shock Mount For King 2.0 Or Fox 2.0 Shock Absorbers 1.25 Inches Wide
|
|
$14.00 |
|
ac425015-vw
|
Stock Chrome Steering Box To Steering Shaft Coupler Female Fits Steering Box Male Is Stock Vw
|
|
$44.75 |
|
415061113c
|
Steering Box For All Standard Beetles To 1977 But For 1961 And Earlier You Must Change Pitman Arm
|
|
$389.90 |
|
ac530020
|
Urethane Irs Rear Trailing Arm Bushings For Stock Or Aftermarket Arms On Stock Pivot
|
|
$30.75 |
|
fasn716-20n
|
Grade 8 Fine Thread 7/16-20 Nylock Hex Nut Zinc Plated Gold Color
|
|
$0.80 |
|
f911bolt716-20x100
|
Super Heavy Duty F911 7/16-20 Fine Thread Grade 9 Hex Bolt 1 Inch Long Fully Threaded
|
|
$1.85 |
|
| |
|
Your shopping cart is empty.
|
|
